Baxter Flo-Gard 6301 Dual-Channel Volumetric Infusion Pump - Preowned in Good Condition
The Baxter 6301 is a dual channel IV pump that has a programmed delivery profile. The Baxter Flo-Gard 6301 Dual-Channel Volumetric Infusion Pump are industry standard in standard set infusion pump technology. The Flo-Gard 6301 Dual Channel Volumetric Infusion Pump from Baxter can deliver a wide variety of fluids over a broad range of infusion rates.
Configurable settings allow the device to be custom-tailored to best suit the hospital's needs. Device can be configured to display a hospital area designator, such as "ONCOLOGY” or "CARDIAC ICU,” upon power-up.
The Baxter 6301 is from the same line of IV pumps as the Baxter 6201, except it offers two channels so that your clinic can deliver fluids to two patients at once. This pump is the upgraded version of the Baxter 6300 refurbished infusion pump. This upgrade offers the auto-restart feature, which means that when the animal bends its arm and causes an occlusion, the pump will re-start automatically once the arm straightens enough for the pressure to be released – this will be sure save your technicians time and hassle.
Flow Check Occlusion Alarm offers an in-line resistance display of incremental back pressure.
Flow Rate Calculation is automatic after volume and time are selected.
Slide Clamp Option offers an additional step to protect against inadvertent gravity free-flow.
Front Panel Lock-out protects against tampering.
Greater Convenience and Versatility
Programmed Delivery Profile allows up to 10 steps,
Individualizing control of infusion ramping and tapering.
Incremental Flow Rate can deliver 1-99.9 mL/hr in increments of 0.1 mL/hr .
Automatic Restart once occlusion clears.
Automatic Piggybacking of secondary medications.
Uses Baxter standard IV administration sets that eliminates the need for costly disposable sets and reduces the potential for waste.
Dual Volumetric I.V. Pump
Flow check occlusion alarm
Flow rate calculation
Programmed delivery profiles
Incremental flow rate
Automatic restart once occlusion clears
Automatic piggybacking for secondary medications
Five-hour memory retains infusion data after power-off
Dimensions: 13 in W x 5.1 in D x 11.4 in H
Weight: 8.1 Kg (17.9 lb)
Battery: 12 volt, 2.0 ampere, sealed lead acid
Battery Recharge: 80% charged within 8 hr.
Battery Life: 6 hr at 1-1,400 mL/hr (4 hr with both channels operating at 1-1,400 mL/hr)
Power Cord: Biomed replaceable 2.75 m (9 ft)
Leakage Current: Less than 50 micro-amps (per UL 544)
Fuse: .8 ampere, 250 volt, slow-blow
Communications Port: RS232 serial port
Operating Environment: 15.5-37.7ºC (60-100ºF)
Power Requirements: 115 VAC, 60 HZ, 50 W
Flow Rate Range:
1 – 99.9 mL/hr in 0.1 mL/hr increments
1 – 1,999 mL/hr in 1 mL/hr increments
Baxter Standard Administration Sets: 2C5331, 2C5417, 1C8160, 2C5431, 2C5418
Baxter Flo-Gard 6301 Operation Manual
Qty - 1 Baxter Flo-Gard 6301 Dual-Channel Infusion Pump
Only items specified in the contents section are available with product.
Cosmetic - Good
Working - Good
NOTICE TO CUSTOMER:
Sales of prescription related equipment is prohibited unless the following is adhered to:
Your facility is Hospital or Medical/Dental Office related
For Individual Use a copy of the Prescription is required prior to shipping.
10% Restocking Fee will be applied in Failure to provide the copy of the Prescription.
Please contact us for any more information