Veris Medrad Monitor Model 8600

Veris Medrad Monitor Model 8600 - Used, Good Condition 

Product Description 

The Veris8600 patient monitor is designed for use in the MARITIMe environment. It interprets and displays physiologic data as waveforms and numeric information which, depending on the configuration of the system, may include ECG, NIBP, SpOt temperature, O, anesthetic gasses, and IBP. User defined alarm limits 2nd alerts may be set for each parameter. Monitored parameter data is stored as tabular trend information and may be printed or downloaded.The system is intended to monitor physiological parameters of patients within any health care environment, specifically in the MRenvironment. The user, responsible to interpret the monitored data made available, will be a professional health care provider.Physiological data, gas monitoring, system alarms, and patient analysis will be available to the care provider from the monitor.The monitor shall be MR compatible based on the FDA guidelines for equipment to be used in MR.There are two distinct needs for patient monitors in MR:• Vital signs monitoring, to monitor medically unstable patients or patients under conscious sedation, as required by the JCAHO.• And, provide image gating, to gate image acquisition to a physiological parameter, such as the cardiac cycle.There is the additional requirement for the accurate function of the equipment in the MR environment. The monitor used in the scan room shall not be affected by the radio frequency pulse or gradient fields and shall not produce any RF interference on the image.The monitor (including accessories) shall be capable of monitoring a full range of patients from neonate to adult. 

Features  

Highly visible color screen on both main and remote unit. 

Monitor up to 6 waveforms 

The unique 5-lead ECG allows you to monitor multiple cardiac electrocardiograms simultaneously. 

The use of Fiber Optic Technology provides safety and accuracy 

Medrad veris MR Patient Monitor is cleared for use on 1.5 T and 3.0 Tesla 

Specifications 

Screen: 1O.4" active color TFT      Resolution: 640 x 480 pixels      Waveforms: 6, maximum      Languages: English, French, German, Italian, Portuguese, Spanish, Japanese           System Outputs      Com Ports: Rs 232-compatible: digital DB9 (COM 1);      mini-DIN8 (COM 2)      Analog Output: mini-DIN8, Selectable waveform output,      Range: -2 to 3 volts,      Any waveform (1 volt signal):      Plethysmograph or Capnogram           Mechanical/Electrical      Size: Remote Display:      10” D x 12.5” W x 14” H      (25.4 cm D x 31.8 cm W x 35.6cm H)      Monitor Top Enclosure:      10.5” D x 14.5” W x 14.5” H      (26.7 cm D x 36.8 cm W x 36.8 cm H)      Main Monitor system (Depth/width/Height at Basel:      24” D x 20” W x G0” H      (61.0cm D x 50.8'cm W x 152.4cm H)      Weight: Monitor Top Enclosure: 20 lbs (9.1 kg)      Remote Display: 12 lbs (5.45 kg)      Main Monitor System: 130 lbs (59.1 kg)      Power Requirements: 35W, typical      voltage: 100, 120, 220, 240, VAC; 50/60 Hz      Battery Life: Minimum of 10 hours on a fully charged battery      Recharge time: Approximately 12 hours, from a discharged voltage of 10.6 volts to a charged voltage of 13.7 volts at ambient conditions (23°c ± 2°c).          ECG      Connectors: 3 or 5 Lead, Standard AAMI      Lead Selection: 3-Lead: I, Il, Ill      5-Lead; I, Il, Ill, aVR, aVL, aVF, V      Printer On Remote Display only      Recorder Type: Internal thermal line printer      Data Formats: Single or dual waveform: Tabular      Paper Speed: 12.5 or 25mm/sec continuous.      (Snapshot at 5Omm/sec) 

Please contact us for more information